Zoneguard Steel Barrier System

/
Zoneguard in use.png

Zoneguard is a revolutionary steel barrier system offering superior protection and lower installation costs. Its lightweight configuration allow up to 750 feet to be mounted on a single truck load, and can be install at a rate of approximately 1,000 linear feet in a one hour. This greatly reduces the amount of trucks and fuel costs compared to traditional concrete barrier.

Trucks typically carry 120 feet of traditional barrier at a time. With Zoneguard, a 700 foot job would only require one truck load! That same job would be six truck loads of concrete k-rail.

  • Superior crash protection

  • Reduced installation cost and time

  • Reduced transport and fuel costs

  • 750+ feet can be transported on a single truck! Install up to 1000 feet per hour

  • Easy storage and transport

  • Meets both NCHRP 350 (TL-3 & TL-4) and MASH (TL-3) crash test standards.U.S. made steel barrier

SLED

/
Highway Crash Cushion SLED 350.png

TL-1 Specs
Weight Empty: 675 lbs
Weight Filled: 2,505 lbs
Length: 12' 7"
Width: 22.5"
Height: 42"
Speed Rating: 31 mph

TL-2 Specs
Weight Empty: 835 lbs
Weight Filled: 4,505 lbs
Length: 18' 11"
Width: 22.5"
Height: 42"
Speed Rating: 45 mph

TL-3 Specs
Weight Empty: 995 lbs
Weight Filled: 6,505 lbs
Length: 25' 3"
Width: 22.5"
Height: 42"
Speed Rating: 62 mph

The Sentry Longitudinal Energy Dissipater (SLED) is a narrow, non-redirective gating crash cushion. Available in multiple sizes.

  • MASH eligible for shielding the blunt end of concrete

  • NCHRP-350 Accepted for shielding the blunt end of concrete, steel or water filler barriers

  • Quick and easy set-up, no foundation anchoring, minimal installation exposure time

  • Cost effective end treatment for concrete, steel or water filled barriers

  • Universal transition quickly and easily attached to a variety of barrier shapes and sizes

  • SLED’s stout design virtually eliminates vaulting

  • Narrow footprint is ideal for work zones or roads with minimal shoulder spacing

  • Shortest length TL-3 Water filled crash cushion, fewer incident impacts

  • Containment impact SLED minimizes debris field

  • Visual “drive by” fill indicators quickly verify water modules are properly filled

  • Accepted for use in uni- and bi-directional applications

  • Internal steel cables help envelop vehicle after an impact, creating a truly “limited gating” system

Need K-Rail? See our K-Rail products and accessories available for rent or sale here.

Temporary Crash Cushions

/
Absorb-M Temp Crash Cushion.png
 

Absorb-M

No ground anchoring, easy deployment and removal, and the shortest length in its class make the ABSORB-M system the contractor’s choice for a work zone-ready MASH crash cushion. It uses interchangeable, nested elements to reduce inventory costs as well as a universal transition to simplify and speed up installation.

At 24” (61 cm) wide, this system is best suited for narrow, tight-fit areas to shield anchored or unanchored barriers up to 42” tall in temporary construction work zone applications.

  • Rapid deployment and retrieval

  • No ground anchoring required

  • MASH TL-2 & TL-3 Compliant

  • Universal transition

  • One interchangeable element for T-2 & TL-3 Forklift ports for lifting while full

  • Narrow footprint

  • Deploy on almost any road surface

  • Shortest MASH TL-3 non-redirective, anchorless crash cushion (21')

  • Acceptable for use on anchored and unanchored barrier

 

AWIZ: Smart Work Zone Systems

/

Automated Work Zone Information Systems (AWIZ) are smart work zones that integrate technology with equipment in highway construction applications. Equipment is connected by wireless technology to send and receive road conditions and warnings. Motorists receive real-time information about upcoming traffic conditions and potential hazards.

Automated End of Queue Warning Systems are a work zone intelligent transportation system consisting of a set of roadside speed sensors and portable changeable message signs (PCMS). The system has a customizable speed threshold to accurately detect queued traffic. This information is then relayed to responsive message boards that transmit warning messages to drivers upstream of the work zone.

AWIZ diagram.png



Auto Flagger

/
AFAD Safety Tech.png

Auto Flaggers increase the safety and security of flaggers, workers and motorists in the work zone. We are an exclusive dealer for Safety Technologies AFADs (auto flagging assistive device).

  • Reduces manpower required to flag by 50%

  • Single person can tow, set up and operate

  • Controls up to 1,000 ft of work-zone at a time

  • Operates for a full day-time work week on one charge

  • Tandem towing


Self Propelled Boom Lifts

/

Niftylift self propelled cherry pickers have working heights ranging from 10m (33ft) to over 28m (92ft). All are compact and manoeuvrable and can be driven from the platform in any boom position, saving time and improving efficiency. With 'Narrow' and 4WD chassis options available* Niftylift self propelled cherry pickers are ideal for industrial or construction environments. 
Easy to use proportional controls make Nifty self propelled cherry pickers simple to operate and features such as telescopic booms, fly-booms and platform rotation help to maximize their effectiveness on any task.

 

Trailer Mounted

/

Niftylift's road towable trailer mounted cherry pickers can be transported easily from site to site and set up quickly using manual or hydraulic outriggers*. They are built to be as light and compact as possible and offer an excellent working envelope for their size, with working heights ranging from 9m (30ft) to over 21m (69ft).

Easy to use proportional controls make them simple to operate and features such as telescopic booms, fly-booms, platform rotation, traction drive and hydraulic outriggers* all help to maximise their effectiveness.

Self Drive

/

Niftylift self drive cherry pickers have working heights ranging from 12m (40ft) to over 21m (69ft). Combining the capabilities of trailer mounts and self propelled cherry pickers, Nifty self drive cherry pickers are compact, lightweight and manoeuvrable. Driven from the platform while stowed, 4WD chassis options maximise traction and hydraulic outriggers allow fast setup even on rough terrain.

Easy to use proportional controls make Niftylift self drive cherry pickers simple to operate and features such as telescopic booms, fly-booms and platform rotation maximise their effectiveness on any task.

 

Submersible Pumps

/
Pump Clear Water Pumps.jpg

Submersible Pumps is a versatile pump for construction and home owner use.  The most popular pump sizes range from 3/4“ to 2” and most of them  operate on 120 volt.

Whether you need to drain a swimming pool, empty a flooded room, basement, or transfer water, we have a pump that will meet your job needs.  

Pending on your job, some of these pumps have floats that will automatically turn ON and OFF as needed.

These pumps can be lowered into a hole to remove water, such as a hole that was drilled for a pier, etc.

Towable Air Compressor

/
towable-air-compressor-185CSN

Towable air compressors support air tools necessary at any pneumatic or air-powered application. Large capacity for uninterrupted operation and includes protective shutdown switches for high engine temperature control.

Towable air compressors offer large side doors and a rear service door provide easy access to all gauges and compartments. Air compressors are designed for quiet operation and protective shutdown control making your job safer from start to finish. Towable air compressors are available ranging from 185 CFM to 1500 CFM to accommodate virtually any job need. 

  • Free Air Delivery: 185 scfm
  • Engine: Yanmar, 4-cylinder, 47.6 HP, Tier 4F Compliant
  • Measurements (LxWxH): 76x49x45 in (without towing frame)
  • Weight (dry/operating): 2120/2620 lb
  • Sound Level: 62 dBA
  • Fuel Capacity: 24.0 gal.